Pk 외환 시장 개방

외환 시장 Pk
Forex. pk, 파키스탄 최고의 외환 포털은 파키스탄 오픈 마켓, 파키스탄 인터 뱅크 & amp; 국제 외환 시장. 여기서 당신은 forex 비율 기록 보관소, 도표, 도표, forex 뉴스, forex 상인 전화 번호부, 통화 디렉토리, 금 가격, 파키스탄 현상 유대 결과 및 forex의 세계를 탐구 할 것을 돕도록 정보의 광범위를 찾아 낼 것이다.
최고의 외환 브로커를 선택하는 것이 중요합니다. Forex Brokers Directroy에서 최고의 외환 중개 회사를 선택하는 방법에 대한 안내서를 찾을 수 있습니다.

Forex. pk.
주제 : 파키스탄 중개인, 전세계 외환 중개인, 은행 간 금리, 외환 차트, 금리 및 채권 금리
인기있는 페이지 forex. pk 파키스탄의 오픈 마켓 환율 forex. pk 금 가격 - 금 가격 - 금 가격, 오늘은 가격 .. forex. pk 파키스탄의 인터 은행 환율.
이 사이트에는 매일 평균 14,274 명의 사용자가 있으며 평균 2.21 페이지를 볼 수 있습니다.
ns0.dnsmadeeasy, ns1.dnsmadeeasy 및 ns2.dnsmadeeasy와 같은 5 개의 DNS 레코드가 있습니다. Forex. pk의 서버 IP 번호는 50.116.97.239입니다.
웹 서버 : Apache.
서버에 대한 ping 시간은 37.6 ms이고 평균 페이지로드 시간은 2187 밀리 초입니다.

forex. pk 정보.
제목 사용 : 제목은 10-80 자 사이의 사이트에 대한 일반적인 설명입니다.
메타 키워드 : 사이트 사용을 정의하는 데 도움이되는 카테고리 및 주제입니다.
크기 : 사이트에서 사용되는 HTML의 크기를 표시합니다.
압축 된 크기 : 압축 된 사이트의 HTML 크기입니다.
텍스트 크기 : HTML을 삭제 한 후 사이트의 순수 텍스트 크기입니다.
사용 된 CSS 표.
Charset : ASCII는 문자 인코딩 표준 (character set이라고도 함)의 첫 번째 문자 인코딩입니다. ASCII는 숫자 (0-9), 영문자 (A-Z) 및 일부 특수 문자와 같이 인터넷에서 사용할 수있는 127 개의 다른 영숫자를 정의했습니다. $ + - ().ANSI (Windows-1252)는 256 개의 다른 문자 코드를 지원하는 원래의 Windows 문자 집합이었습니다.
코드 유형 : 사이트 디자인에 사용 된 코딩 유형을 표시합니다.
HTML 버전 : 사이트 디자인에 사용 된 코딩 버전을 표시합니다.
Robots. txt : 검색 엔진에서 사용하는 robots. txt에 사이트를 탐색하는 방법을 알려주는 것입니다. robots. txt를 사용하는 것이 좋습니다.
반응 : 데스크톱 컴퓨터와 호환되는 사이트가 타블렛 컴퓨터 및 모바일 장치와도 호환되는지 여부를 보여줍니다. 사용 : 태그로 이것을 보여줄 수 있습니다 :.
파키스탄의 파운드 환율 파키스탄의 669 % 환율 615 % 외환 피크 367 % 금 가격 293 % 달러 환율 파키스탄의 달러 비율 255 % 파키스탄의 239 % 금리 226 % 파키스탄 금리 225 % 외환 시장 파키스탄의 금리 167 % 141 %
순위 : 귀하의 사이트가 전 세계의 다른 사이트 중 어디에 속하는지.
국가 순위 : 귀하의 사이트는 해당 국가의 다른 사이트 중 순위가 매겨집니다.
대부분의 검색어 : 귀하의 사이트가 검색 엔진에서 어떻게 발견되었는지를 보여줍니다. 이 단어는 귀하의 웹 사이트를 찾는 데 사용되었습니다.
PageRank : Google은 0-10의 척도로 사이트 순위를 매긴다. 순위가 높을수록 Google에서 더 유용하고 유익한 사이트로 간주됩니다.
분석 : 세계 최대의 검색 엔진 인 Google은 다른 많은 훌륭한 서비스도 제공합니다. 제공되는 이러한 서비스 중 하나는 분석입니다. 귀하의 사이트에 작은 코드가 추가되어 Analytics를 사용하면 사이트의 모든 사용자 데이터를 추적 할 수 있습니다. 다음과 같은 무료 서비스가 있습니다. 실시간 사용자 데이터 일반적으로 사용자 데이터 위치 별 사용자 데이터 트래픽 소스 잠재 고객보기 모든 사용자 항목 및 데이터의 소급보기 사이트에 대한 데스크톱, 태블릿 및 모바일 항목 사용자 획득 사용자 동작 그리고 더 많은 통계 및 내용.

Showsite. org.
정보 및 사이트 분석 표시.
Forex. pk는 실시간 환율, 아카이브, 그래프, 차트, 뉴스를 제공합니다. 파키스탄 루피를 미국 달러로 표시하고 PKR을 USD, GBP, 유로화로 변환하십시오. 파키스탄 공개 시장을 확보하십시오.
웹 사이트 메타 분석.
기술 분석.
하이퍼 텍스트 전송 프로토콜 (HTTP) 헤더는 ninodezign의 데이터 헤더 응답을 보여줍니다.
HTML 분석.
날짜 : 토요일, 02 3 월 2013 08:32:34 GMT 서버 : 아파치 만료 : 목요일, 1981 년 11 월 19 일 08:52:00 GMT 캐시 제어 : no-store, no-cache, must-revalidate, post-check = 0 , pre-check = 0 pragma : no-cache content-type : text / html x-google-cache-control : 원격 가져 오기 : HTTP / 1.1 GWA.
forex. pk에 대한 데이터가 없습니다.
기술 분석.
DNS 레코드.
IP 50.116.97.239 분석.
% rwhois V-1.5 : 003eff : 00 rwhois. websitewelcome (Network Solutions, Inc. V-1.5.9.5에 의함)
페이지 분석
forex. pk에는 3 개의 아웃 링크가 있습니다. 내부 링크에 대한 외부 링크의 관계는 일반적으로 사이트의 가중치 분포에 영향을줍니다. 인덱싱 된 페이지의 양을 늘리려면 외부 링크보다 더 많은 내부 링크가 있어야합니다.
발신 링크.
구글 애드 센스 이드.
사이트 동일 분석 (더보기)
구글 애드 센스 이드.
사이트 동일 분석 (더보기)
트래픽 분석.
Magestic Backlinks.
데일리 랭크.
순위 추세.
방문자 동향.
바운스 추세.
HTML 분석.
HTML 유효성 검사.
150 오류 26 경고.
비율 텍스트 / Html.
메시지 오류.
13 행 44 열 : NET 사용 가능 시작 태그에는 SHORTTAG YES가 필요합니다.
현재 문서의 경우 유효성 검사기는 & lt; FOO / & gt; 대부분의 작성자의 기대를 깨고 유효성 검사기에서 혼동스러운 경고 및 오류 메시지를 발생시키는 기존 규칙에 따라 이 해석은 HTML 4 문서 또는 다른 SGML 기반 HTML 문서에 의해 트리거됩니다. 메시지를 피하려면 & quot; / & quot; 이러한 맥락에서 문자. 주의 : & lt; FOO / & gt; XML - 호환 "자체 폐쇄 (self-closing)"기능으로 해석되어야한다. 태그가 있으면 XHTML 또는 HTML5를 사용해야합니다.
이 경고 및 관련 오류는 하나 이상의 & quot; / & quot;을 포함하는 인용되지 않은 속성 값으로 인해 발생할 수도 있습니다. 예 : & lt; a href = w3c. org & gt; W3C & lt; / a & gt; . 이 경우 해결 방법은 값을 따옴표로 묶는 것입니다.
위의 요소는 허용되지 않는 컨텍스트에서 발견되었습니다. 이는 & quot; 스타일 & quot;과 같은 중첩 된 요소가 잘못되었다는 것을 의미 할 수 있습니다. "body"엘리먼트 내의 "element" "헤드 (head)"대신에 섹션 (section) - 또는 겹치는 두 요소 (허용되지 않음).
이 오류의 일반적인 원인 중 하나는 HTML 문서에서 XHTML 구문을 사용하는 것입니다. HTML의 암시 적으로 닫힌 요소의 규칙으로 인해이 오류는 계단식 효과를 만들 수 있습니다. 예를 들어, XHTML의 "자체 폐쇄" & quot; 메타 & quot; 및 "링크" "헤드 (head)" HTML 문서의 섹션은 파서가 "head"태그의 끝을 추론하도록 할 수있다. 섹션의 시작 부분과 "몸체" 섹션 (여기서 "링크"및 "메타"는 허용되지 않으므로보고 된 오류).
현재 문서의 경우 유효성 검사기는 & lt; FOO / & gt; 대부분의 작성자의 기대를 깨고 유효성 검사기에서 혼동스러운 경고 및 오류 메시지를 발생시키는 기존 규칙에 따라 이 해석은 HTML 4 문서 또는 다른 SGML 기반 HTML 문서에 의해 트리거됩니다. 메시지를 피하려면 & quot; / & quot; 이러한 맥락에서 문자. 주의 : & lt; FOO / & gt; XML - 호환 "자체 폐쇄 (self-closing)"기능으로 해석되어야한다. 태그가 있으면 XHTML 또는 HTML5를 사용해야합니다.
이 경고 및 관련 오류는 하나 이상의 & quot; / & quot;을 포함하는 인용되지 않은 속성 값으로 인해 발생할 수도 있습니다. 예 : & lt; a href = w3c. org & gt; W3C & lt; / a & gt; . 이 경우 해결 방법은 값을 따옴표로 묶는 것입니다.
위의 요소는 허용되지 않는 컨텍스트에서 발견되었습니다. 이는 & quot; 스타일 & quot;과 같은 중첩 된 요소가 잘못되었다는 것을 의미 할 수 있습니다. "body"엘리먼트 내의 "element" "헤드 (head)"대신에 섹션 (section) - 또는 겹치는 두 요소 (허용되지 않음).
이 오류의 일반적인 원인 중 하나는 HTML 문서에서 XHTML 구문을 사용하는 것입니다. HTML의 암시 적으로 닫힌 요소의 규칙으로 인해이 오류는 계단식 효과를 만들 수 있습니다. 예를 들어, XHTML의 "자체 폐쇄" & quot; 메타 & quot; 및 "링크" "헤드 (head)" HTML 문서의 섹션은 파서가 & quot; head & quot; 파일의 끝을 추론하도록 할 수 있습니다. 섹션의 시작 부분과 "몸체" 섹션 (여기서 "링크"및 "메타"는 허용되지 않으므로보고 된 오류).
위의 요소는 허용되지 않는 컨텍스트에서 발견되었습니다. 이는 & quot; 스타일 & quot;과 같은 중첩 된 요소가 잘못되었다는 것을 의미 할 수 있습니다. "body"엘리먼트 내의 "element" "헤드 (head)"대신에 섹션 (section) - 또는 겹치는 두 요소 (허용되지 않음).
이 오류의 일반적인 원인 중 하나는 HTML 문서에서 XHTML 구문을 사용하는 것입니다. HTML의 암시 적으로 닫힌 요소의 규칙으로 인해이 오류는 계단식 효과를 만들 수 있습니다. 예를 들어, XHTML의 "자체 폐쇄" & quot; 메타 & quot; 및 "링크" "헤드 (head)" HTML 문서의 섹션은 파서가 & quot; head & quot; 파일의 끝을 추론하도록 할 수 있습니다. 섹션의 시작 부분과 "몸체" 섹션 (여기서 "링크"및 "메타"는 허용되지 않으므로보고 된 오류).
Validator는 위의 요소에 대한 종료 태그를 찾았지만 해당 요소는 현재 열려 있지 않습니다. 이것은 종종 편집 중에 제거 된 요소의 나머지 태그 또는 암시 적으로 닫힌 요소에 의해 발생합니다 (허용되지 않는 요소와 관련된 오류가있는 경우 거의 확실합니다). 후자의 경우이 오류는 원래 문제점을 수정하자 마자 사라집니다.
이 오류가 문서의 스크립트 섹션에서 발생한 경우이 FAQ 항목을 읽어야합니다.
위의 요소는 허용되지 않는 컨텍스트에서 발견되었습니다. 이는 & quot; 스타일 & quot;과 같은 중첩 된 요소가 잘못되었다는 것을 의미 할 수 있습니다. "body"엘리먼트 내의 "element" "헤드 (head)"대신에 섹션 (section) - 또는 겹치는 두 요소 (허용되지 않음).
이 오류의 일반적인 원인 중 하나는 HTML 문서에서 XHTML 구문을 사용하는 것입니다. HTML의 암시 적으로 닫힌 요소의 규칙으로 인해이 오류는 계단식 효과를 만들 수 있습니다. 예를 들어, XHTML의 "자체 폐쇄" & quot; 메타 & quot; 및 "링크" "헤드 (head)" HTML 문서의 섹션은 파서가 & quot; head & quot; 파일의 끝을 추론하도록 할 수 있습니다. 섹션의 시작 부분과 "몸체" 섹션 (여기서 "링크"및 "메타"는 허용되지 않으므로보고 된 오류).
위의 특성을 문서에서 사용했지만 사용중인 문서 형식이이 요소의 해당 특성을 지원하지 않습니다. 이 오류는 종종 '엄격한'코드를 잘못 사용하여 발생합니다. 프레임 유형을 사용하는 문서와의 문서 유형 (예 : '전환'문서 유형을 사용하여 '타겟'속성을 가져와야 함) 또는 'marginheight'와 같은 공급 업체 독점 확장을 사용하여 (대개 원하는 효과를 얻기 위해 CSS를 사용하여 고정됩니다).
이 오류는 정의되지 않은 요소에 지원되는 속성이 없으므로 사용중인 문서 유형에서 요소 자체가 지원되지 않는 경우에도 발생할 수 있습니다. 이 경우 자세한 정보는 element-undefined 오류 메시지를 참조하십시오.
수정 방법 : 요소 및 속성의 맞춤법 및 대소 문자를 확인하고 (XHTML은 모두 소문자임을 기억하십시오) 및 / 또는 선택한 문서 유형에서 허용되는지 확인하고 / 또는이 속성 대신 CSS를 사용하십시오. & lt; embed & gt;을 사용할 때이 오류가 발생하면 요소를 사용하여 웹 페이지에 플래시 미디어를 통합하려면 유효한 플래시의 FAQ 항목을 참조하십시오.
위의 요소는 허용되지 않는 컨텍스트에서 발견되었습니다. 이는 & quot; 스타일 & quot;과 같은 중첩 된 요소가 잘못되었다는 것을 의미 할 수 있습니다. "body"엘리먼트 내의 "element" "헤드 (head)"대신에 섹션 (section) - 또는 겹치는 두 요소 (허용되지 않음).
이 오류의 일반적인 원인 중 하나는 HTML 문서에서 XHTML 구문을 사용하는 것입니다. HTML의 암시 적으로 닫힌 요소의 규칙으로 인해이 오류는 계단식 효과를 만들 수 있습니다. 예를 들어, XHTML의 "자체 폐쇄" & quot; 메타 & quot; 및 "링크" "헤드 (head)" HTML 문서의 섹션은 파서가 & quot; head & quot; 파일의 끝을 추론하도록 할 수 있습니다. 섹션의 시작 부분과 "몸체" 섹션 (여기서 "링크"및 "메타"는 허용되지 않으므로보고 된 오류).
위에 주어진 속성은 사용했던 요소에 필요하지만 생략했습니다. 예를 들어, 대부분의 HTML 및 XHTML 문서 유형에서 & quot; 유형 & quot; 속성은 & quot; 스크립트 & quot; 요소 및 "alt" 속성은 "img"속성에 필요합니다. 요소.
type의 일반적인 값은 type = & quot; text / css & quot;입니다. & lt; style & gt; & type = "text / javascript"를 입력하십시오. & lt; script & gt;에 대한 .
현재 문서의 경우 유효성 검사기는 & lt; FOO / & gt; 대부분의 작성자의 기대를 깨고 유효성 검사기에서 혼동스러운 경고 및 오류 메시지를 발생시키는 기존 규칙에 따라 이 해석은 HTML 4 문서 또는 다른 SGML 기반 HTML 문서에 의해 트리거됩니다. 메시지를 피하려면 & quot; / & quot; 이러한 맥락에서 문자. 주의 : & lt; FOO / & gt; XML - 호환 "자체 폐쇄 (self-closing)"기능으로 해석되어야한다. 태그가 있으면 XHTML 또는 HTML5를 사용해야합니다.
이 경고 및 관련 오류는 하나 이상의 & quot; / & quot;을 포함하는 인용되지 않은 속성 값으로 인해 발생할 수도 있습니다. 예 : & lt; a href = w3c. org & gt; W3C & lt; / a & gt; . 이 경우 해결 방법은 값을 따옴표로 묶는 것입니다.
위에 주어진 속성은 사용했던 요소에 필요하지만 생략했습니다. 예를 들어, 대부분의 HTML 및 XHTML 문서 유형에서 & quot; 유형 & quot; 속성은 & quot; 스크립트 & quot; 요소 및 "alt" 속성은 "img"속성에 필요합니다. 요소.
type의 일반적인 값은 type = & quot; text / css & quot;입니다. & lt; style & gt; & type = "text / javascript"를 입력하십시오. & lt; script & gt;에 대한 .
위에 주어진 속성은 사용했던 요소에 필요하지만 생략했습니다. 예를 들어, 대부분의 HTML 및 XHTML 문서 유형에서 & quot; 유형 & quot; 속성은 & quot; 스크립트 & quot; 요소 및 "alt" 속성은 "img"속성에 필요합니다. 요소.
type의 일반적인 값은 type = & quot; text / css & quot;입니다. & lt; style & gt; & type = "text / javascript"를 입력하십시오. & lt; script & gt;에 대한 .
위에 주어진 속성은 사용했던 요소에 필요하지만 생략했습니다. 예를 들어, 대부분의 HTML 및 XHTML 문서 유형에서 & quot; 유형 & quot; 속성은 & quot; 스크립트 & quot; 요소 및 "alt" 속성은 "img"속성에 필요합니다. 요소.
type의 일반적인 값은 type = & quot; text / css & quot;입니다. & lt; style & gt; & type = "text / javascript"를 입력하십시오. & lt; script & gt;에 대한 .
위에 주어진 속성은 사용했던 요소에 필요하지만 생략했습니다. 예를 들어, 대부분의 HTML 및 XHTML 문서 유형에서 & quot; 유형 & quot; 속성은 & quot; 스크립트 & quot; 요소 및 "alt" 속성은 "img"속성에 필요합니다. 요소.
type의 일반적인 값은 type = & quot; text / css & quot;입니다. & lt; style & gt; & type = "text / javascript"를 입력하십시오. & lt; script & gt;에 대한 .
위에 주어진 속성은 사용했던 요소에 필요하지만 생략했습니다. 예를 들어, 대부분의 HTML 및 XHTML 문서 유형에서 & quot; 유형 & quot; 속성은 & quot; 스크립트 & quot; 요소 및 "alt" 속성은 "img"속성에 필요합니다. 요소.
type의 일반적인 값은 type = & quot; text / css & quot;입니다. & lt; style & gt; & type = "text / javascript"를 입력하십시오. & lt; script & gt;에 대한 .
현재 문서의 경우 유효성 검사기는 & lt; FOO / & gt; 대부분의 작성자의 기대를 깨고 유효성 검사기에서 혼동스러운 경고 및 오류 메시지를 발생시키는 기존 규칙에 따라 이 해석은 HTML 4 문서 또는 다른 SGML 기반 HTML 문서에 의해 트리거됩니다. 메시지를 피하려면 & quot; / & quot; 이러한 맥락에서 문자. 주의 : & lt; FOO / & gt; XML - 호환 "자체 폐쇄 (self-closing)"기능으로 해석되어야한다. 태그가 있으면 XHTML 또는 HTML5를 사용해야합니다.
이 경고 및 관련 오류는 하나 이상의 & quot; / & quot;을 포함하는 인용되지 않은 속성 값으로 인해 발생할 수도 있습니다. 예 : & lt; a href = w3c. org & gt; W3C & lt; / a & gt; . 이 경우 해결 방법은 값을 따옴표로 묶는 것입니다.
위에 주어진 속성은 사용했던 요소에 필요하지만 생략했습니다. 예를 들어, 대부분의 HTML 및 XHTML 문서 유형에서 & quot; 유형 & quot; 속성은 & quot; 스크립트 & quot; 요소 및 "alt" 속성은 "img"속성에 필요합니다. 요소.
type의 일반적인 값은 type = & quot; text / css & quot;입니다. & lt; style & gt; & type = "text / javascript"를 입력하십시오. & lt; script & gt;에 대한 .
현재 문서의 경우 유효성 검사기는 & lt; FOO / & gt; 대부분의 작성자의 기대를 깨고 유효성 검사기에서 혼동스러운 경고 및 오류 메시지를 발생시키는 기존 규칙에 따라 이 해석은 HTML 4 문서 또는 다른 SGML 기반 HTML 문서에 의해 트리거됩니다. 메시지를 피하려면 & quot; / & quot; 이러한 맥락에서 문자. 주의 : & lt; FOO / & gt; XML - 호환 "자체 폐쇄 (self-closing)"기능으로 해석되어야한다. 태그가 있으면 XHTML 또는 HTML5를 사용해야합니다.
이 경고 및 관련 오류는 하나 이상의 & quot; / & quot;을 포함하는 인용되지 않은 속성 값으로 인해 발생할 수도 있습니다. 예 : & lt; a href = w3c. org & gt; W3C & lt; / a & gt; . 이 경우 해결 방법은 값을 따옴표로 묶는 것입니다.
위에 주어진 속성은 사용했던 요소에 필요하지만 생략했습니다. 예를 들어, 대부분의 HTML 및 XHTML 문서 유형에서 & quot; 유형 & quot; 속성은 & quot; 스크립트 & quot; 요소 및 "alt" 속성은 "img"속성에 필요합니다. 요소.
type의 일반적인 값은 type = & quot; text / css & quot;입니다. & lt; style & gt; & type = "text / javascript"를 입력하십시오. & lt; script & gt;에 대한 .
위에 주어진 속성은 사용했던 요소에 필요하지만 생략했습니다. 예를 들어, 대부분의 HTML 및 XHTML 문서 유형에서 & quot; 유형 & quot; 속성은 & quot; 스크립트 & quot; 요소 및 "alt" 속성은 "img"속성에 필요합니다. 요소.
type의 일반적인 값은 type = & quot; text / css & quot;입니다. & lt; style & gt; & type = "text / javascript"를 입력하십시오. & lt; script & gt;에 대한 .
위에 주어진 속성은 사용했던 요소에 필요하지만 생략했습니다. 예를 들어, 대부분의 HTML 및 XHTML 문서 유형에서 & quot; 유형 & quot; 속성은 & quot; 스크립트 & quot; 요소 및 "alt" 속성은 "img"속성에 필요합니다. 요소.
type의 일반적인 값은 type = & quot; text / css & quot;입니다. & lt; style & gt; & type = "text / javascript"를 입력하십시오. & lt; script & gt;에 대한 .
현재 문서의 경우 유효성 검사기는 & lt; FOO / & gt; 대부분의 작성자의 기대를 깨고 유효성 검사기에서 혼동스러운 경고 및 오류 메시지를 발생시키는 기존 규칙에 따라 이 해석은 HTML 4 문서 또는 다른 SGML 기반 HTML 문서에 의해 트리거됩니다. 메시지를 피하려면 & quot; / & quot; 이러한 맥락에서 문자. 주의 : & lt; FOO / & gt; XML - 호환 "자체 폐쇄 (self-closing)"기능으로 해석되어야한다. 태그가 있으면 XHTML 또는 HTML5를 사용해야합니다.
이 경고 및 관련 오류는 하나 이상의 & quot; / & quot;을 포함하는 인용되지 않은 속성 값으로 인해 발생할 수도 있습니다. 예 : & lt; a href = w3c. org & gt; W3C & lt; / a & gt; . 이 경우 해결 방법은 값을 따옴표로 묶는 것입니다.
위에 주어진 속성은 사용했던 요소에 필요하지만 생략했습니다. 예를 들어, 대부분의 HTML 및 XHTML 문서 유형에서 & quot; 유형 & quot; 속성은 & quot; 스크립트 & quot; 요소 및 "alt" 속성은 "img"속성에 필요합니다. 요소.
type의 일반적인 값은 type = & quot; text / css & quot;입니다. & lt; style & gt; & type = "text / javascript"를 입력하십시오. & lt; script & gt;에 대한 .
현재 문서의 경우 유효성 검사기는 & lt; FOO / & gt; 대부분의 작성자의 기대를 깨고 유효성 검사기에서 혼동스러운 경고 및 오류 메시지를 발생시키는 기존 규칙에 따라 이 해석은 HTML 4 문서 또는 다른 SGML 기반 HTML 문서에 의해 트리거됩니다. 메시지를 피하려면 & quot; / & quot; 이러한 맥락에서 문자. 주의 : & lt; FOO / & gt; XML - 호환 "자체 폐쇄 (self-closing)"기능으로 해석되어야한다. 태그가 있으면 XHTML 또는 HTML5를 사용해야합니다.
이 경고 및 관련 오류는 하나 이상의 & quot; / & quot;을 포함하는 인용되지 않은 속성 값으로 인해 발생할 수도 있습니다. 예 : & lt; a href = w3c. org & gt; W3C & lt; / a & gt; . 이 경우 해결 방법은 값을 따옴표로 묶는 것입니다.
위에 주어진 속성은 사용했던 요소에 필요하지만 생략했습니다. 예를 들어, 대부분의 HTML 및 XHTML 문서 유형에서 & quot; 유형 & quot; 속성은 & quot; 스크립트 & quot; 요소 및 "alt" 속성은 "img"속성에 필요합니다. 요소.
type의 일반적인 값은 type = & quot; text / css & quot;입니다. & lt; style & gt; & type = "text / javascript"를 입력하십시오. & lt; script & gt;에 대한 .
현재 문서의 경우 유효성 검사기는 & lt; FOO / & gt; 대부분의 작성자의 기대를 깨고 유효성 검사기에서 혼동스러운 경고 및 오류 메시지를 발생시키는 기존 규칙에 따라 이 해석은 HTML 4 문서 또는 다른 SGML 기반 HTML 문서에 의해 트리거됩니다. 메시지를 피하려면 & quot; / & quot; 이러한 맥락에서 문자. 주의 : & lt; FOO / & gt; XML - 호환 "자체 폐쇄 (self-closing)"기능으로 해석되어야한다. 태그가 있으면 XHTML 또는 HTML5를 사용해야합니다.
이 경고 및 관련 오류는 하나 이상의 & quot; / & quot;을 포함하는 인용되지 않은 속성 값으로 인해 발생할 수도 있습니다. 예 : & lt; a href = w3c. org & gt; W3C & lt; / a & gt; . 이 경우 해결 방법은 값을 따옴표로 묶는 것입니다.
위에 주어진 속성은 사용했던 요소에 필요하지만 생략했습니다. 예를 들어, 대부분의 HTML 및 XHTML 문서 유형에서 & quot; 유형 & quot; 속성은 & quot; 스크립트 & quot; 요소 및 "alt" 속성은 "img"속성에 필요합니다. 요소.
type의 일반적인 값은 type = & quot; text / css & quot;입니다. & lt; style & gt; & type = "text / javascript"를 입력하십시오. & lt; script & gt;에 대한 .
현재 문서의 경우 유효성 검사기는 & lt; FOO / & gt; 대부분의 작성자의 기대를 깨고 유효성 검사기에서 혼동스러운 경고 및 오류 메시지를 발생시키는 기존 규칙에 따라 이 해석은 HTML 4 문서 또는 다른 SGML 기반 HTML 문서에 의해 트리거됩니다. 메시지를 피하려면 & quot; / & quot; 이러한 맥락에서 문자. 주의 : & lt; FOO / & gt; XML - 호환 "자체 폐쇄 (self-closing)"기능으로 해석되어야한다. 태그가 있으면 XHTML 또는 HTML5를 사용해야합니다.
이 경고 및 관련 오류는 하나 이상의 & quot; / & quot;을 포함하는 인용되지 않은 속성 값으로 인해 발생할 수도 있습니다. 예 : & lt; a href = w3c. org & gt; W3C & lt; / a & gt; . 이 경우 해결 방법은 값을 따옴표로 묶는 것입니다.
위에 주어진 속성은 사용했던 요소에 필요하지만 생략했습니다. 예를 들어, 대부분의 HTML 및 XHTML 문서 유형에서 & quot; 유형 & quot; 속성은 & quot; 스크립트 & quot; 요소 및 "alt" 속성은 "img"속성에 필요합니다. 요소.
type의 일반적인 값은 type = & quot; text / css & quot;입니다. & lt; style & gt; & type = "text / javascript"를 입력하십시오. & lt; script & gt;에 대한 .
현재 문서의 경우 유효성 검사기는 & lt; FOO / & gt; 대부분의 작성자의 기대를 깨고 유효성 검사기에서 혼동스러운 경고 및 오류 메시지를 발생시키는 기존 규칙에 따라 이 해석은 HTML 4 문서 또는 다른 SGML 기반 HTML 문서에 의해 트리거됩니다. 메시지를 피하려면 & quot; / & quot; 이러한 맥락에서 문자. 주의 : & lt; FOO / & gt; XML - 호환 "자체 폐쇄 (self-closing)"기능으로 해석되어야한다. 태그가 있으면 XHTML 또는 HTML5를 사용해야합니다.
이 경고 및 관련 오류는 하나 이상의 & quot; / & quot;을 포함하는 인용되지 않은 속성 값으로 인해 발생할 수도 있습니다. 예 : & lt; a href = w3c. org & gt; W3C & lt; / a & gt; . 이 경우 해결 방법은 값을 따옴표로 묶는 것입니다.
위에 주어진 속성은 사용했던 요소에 필요하지만 생략했습니다. 예를 들어, 대부분의 HTML 및 XHTML 문서 유형에서 & quot; 유형 & quot; 속성은 & quot; 스크립트 & quot; 요소 및 "alt" 속성은 "img"속성에 필요합니다. 요소.
type의 일반적인 값은 type = & quot; text / css & quot;입니다. & lt; style & gt; & type = "text / javascript"를 입력하십시오. & lt; script & gt;에 대한 .
위에 주어진 속성은 사용했던 요소에 필요하지만 생략했습니다. 예를 들어, 대부분의 HTML 및 XHTML 문서 유형에서 & quot; 유형 & quot; 속성은 & quot; 스크립트 & quot; 요소 및 "alt" 속성은 "img"속성에 필요합니다. 요소.
type의 일반적인 값은 type = & quot; text / css & quot;입니다. & lt; style & gt; & type = "text / javascript"를 입력하십시오. & lt; script & gt;에 대한 .
현재 문서의 경우 유효성 검사기는 & lt; FOO / & gt; 대부분의 작성자의 기대를 깨고 유효성 검사기에서 혼동스러운 경고 및 오류 메시지를 발생시키는 기존 규칙에 따라 이 해석은 HTML 4 문서 또는 다른 SGML 기반 HTML 문서에 의해 트리거됩니다. 메시지를 피하려면 & quot; / & quot; 이러한 맥락에서 문자. 주의 : & lt; FOO / & gt; XML - 호환 "자체 폐쇄 (self-closing)"기능으로 해석되어야한다. 태그가 있으면 XHTML 또는 HTML5를 사용해야합니다.
이 경고 및 관련 오류는 하나 이상의 & quot; / & quot;을 포함하는 인용되지 않은 속성 값으로 인해 발생할 수도 있습니다. 예 : & lt; a href = w3c. org & gt; W3C & lt; / a & gt; . 이 경우 해결 방법은 값을 따옴표로 묶는 것입니다.
위에 주어진 속성은 사용했던 요소에 필요하지만 생략했습니다. 예를 들어, 대부분의 HTML 및 XHTML 문서 유형에서 & quot; 유형 & quot; 속성은 & quot; 스크립트 & quot; 요소 및 "alt" 속성은 "img"속성에 필요합니다. 요소.
type의 일반적인 값은 type = & quot; text / css & quot;입니다. & lt; style & gt; & type = "text / javascript"를 입력하십시오. & lt; script & gt;에 대한 .
현재 문서의 경우 유효성 검사기는 & lt; FOO / & gt; 대부분의 작성자의 기대를 깨고 유효성 검사기에서 혼동스러운 경고 및 오류 메시지를 발생시키는 기존 규칙에 따라 이 해석은 HTML 4 문서 또는 다른 SGML 기반 HTML 문서에 의해 트리거됩니다. 메시지를 피하려면 & quot; / & quot; 이러한 맥락에서 문자. 주의 : & lt; FOO / & gt; XML - 호환 "자체 폐쇄 (self-closing)"기능으로 해석되어야한다. 태그가 있으면 XHTML 또는 HTML5를 사용해야합니다.
이 경고 및 관련 오류는 하나 이상의 & quot; / & quot;을 포함하는 인용되지 않은 속성 값으로 인해 발생할 수도 있습니다. 예 : & lt; a href = w3c. org & gt; W3C & lt; / a & gt; . 이 경우 해결 방법은 값을 따옴표로 묶는 것입니다.
위에 주어진 속성은 사용했던 요소에 필요하지만 생략했습니다. 예를 들어, 대부분의 HTML 및 XHTML 문서 유형에서 & quot; 유형 & quot; 속성은 & quot; 스크립트 & quot; 요소 및 "alt" 속성은 "img"속성에 필요합니다. 요소.
type의 일반적인 값은 type = & quot; text / css & quot;입니다. & lt; style & gt; & type = "text / javascript"를 입력하십시오. & lt; script & gt;에 대한 .
현재 문서의 경우 유효성 검사기는 & lt; FOO / & gt; 대부분의 작성자의 기대를 깨고 유효성 검사기에서 혼동스러운 경고 및 오류 메시지를 발생시키는 기존 규칙에 따라 이 해석은 HTML 4 문서 또는 다른 SGML 기반 HTML 문서에 의해 트리거됩니다. 메시지를 피하려면 & quot; / & quot; 이러한 맥락에서 문자. 주의 : & lt; FOO / & gt; XML - 호환 "자체 폐쇄 (self-closing)"기능으로 해석되어야한다. 태그가 있으면 XHTML 또는 HTML5를 사용해야합니다.
이 경고 및 관련 오류는 하나 이상의 & quot; / & quot;을 포함하는 인용되지 않은 속성 값으로 인해 발생할 수도 있습니다. 예 : & lt; a href = w3c. org & gt; W3C & lt; / a & gt; . 이 경우 해결 방법은 값을 따옴표로 묶는 것입니다.
위에 주어진 속성은 사용했던 요소에 필요하지만 생략했습니다. 예를 들어, 대부분의 HTML 및 XHTML 문서 유형에서 & quot; 유형 & quot; 속성은 & quot; 스크립트 & quot; 요소 및 "alt" 속성은 "img"속성에 필요합니다. 요소.
type의 일반적인 값은 type = & quot; text / css & quot;입니다. & lt; style & gt; & type = "text / javascript"를 입력하십시오. & lt; script & gt;에 대한 .
위에 주어진 속성은 사용했던 요소에 필요하지만 생략했습니다. 예를 들어, 대부분의 HTML 및 XHTML 문서 유형에서 & quot; 유형 & quot; 속성은 & quot; 스크립트 & quot; 요소 및 "alt" 속성은 "img"속성에 필요합니다. 요소.
type의 일반적인 값은 type = & quot; text / css & quot;입니다. & lt; style & gt; & type = "text / javascript"를 입력하십시오. & lt; script & gt;에 대한 .
위의 특성을 문서에서 사용했지만 사용중인 문서 형식이이 요소의 해당 특성을 지원하지 않습니다. 이 오류는 종종 '엄격한'코드를 잘못 사용하여 발생합니다. 프레임 유형을 사용하는 문서와의 문서 유형 (예 : '전환'문서 유형을 사용하여 '타겟'속성을 가져와야 함) 또는 'marginheight'와 같은 공급 업체 독점 확장을 사용하여 (대개 원하는 효과를 얻기 위해 CSS를 사용하여 고정됩니다).
이 오류는 정의되지 않은 요소에 지원되는 속성이 없으므로 사용중인 문서 유형에서 요소 자체가 지원되지 않는 경우에도 발생할 수 있습니다. 이 경우 자세한 정보는 element-undefined 오류 메시지를 참조하십시오.
수정 방법 : 요소 및 속성의 맞춤법 및 대소 문자를 확인하고 (XHTML은 모두 소문자임을 기억하십시오) 및 / 또는 선택한 문서 유형에서 허용되는지 확인하고 / 또는이 속성 대신 CSS를 사용하십시오. & lt; embed & gt;을 사용할 때이 오류가 발생하면 요소를 사용하여 웹 페이지에 플래시 미디어를 통합하려면 유효한 플래시의 FAQ 항목을 참조하십시오.
속성의 값은 가능한 값 목록 중 하나로 정의되지만 문서에는 해당 유형의 속성에 허용되지 않는 내용이 들어 있습니다. 예를 들어, "selected"속성은 "selected"로 최소화되거나 "selected ="selected "로 철자해야합니다. "; "selected ="true "와 같은 값은" "허용되지 않습니다.
현재 문서의 경우 유효성 검사기는 & lt; FOO / & gt; 대부분의 작성자의 기대를 깨고 유효성 검사기에서 혼동스러운 경고 및 오류 메시지를 발생시키는 기존 규칙에 따라 이 해석은 HTML 4 문서 또는 다른 SGML 기반 HTML 문서에 의해 트리거됩니다. 메시지를 피하려면 & quot; / & quot; 이러한 맥락에서 문자. 주의 : & lt; FOO / & gt; XML - 호환 "자체 폐쇄 (self-closing)"기능으로 해석되어야한다. 태그가 있으면 XHTML 또는 HTML5를 사용해야합니다.
이 경고 및 관련 오류는 하나 이상의 & quot; / & quot;을 포함하는 인용되지 않은 속성 값으로 인해 발생할 수도 있습니다. 예 : & lt; a href = w3c. org & gt; W3C & lt; / a & gt; . 이 경우 해결 방법은 값을 따옴표로 묶는 것입니다.
현재 문서의 경우 유효성 검사기는 & lt; FOO / & gt; 대부분의 작성자의 기대를 깨고 유효성 검사기에서 혼동스러운 경고 및 오류 메시지를 발생시키는 기존 규칙에 따라 이 해석은 HTML 4 문서 또는 다른 SGML 기반 HTML 문서에 의해 트리거됩니다. 메시지를 피하려면 & quot; / & quot; 이러한 맥락에서 문자. 주의 : & lt; FOO / & gt; XML - 호환 "자체 폐쇄 (self-closing)"기능으로 해석되어야한다. 태그가 있으면 XHTML 또는 HTML5를 사용해야합니다.
이 경고 및 관련 오류는 하나 이상의 & quot; / & quot;을 포함하는 인용되지 않은 속성 값으로 인해 발생할 수도 있습니다. 예 : & lt; a href = w3c. org & gt; W3C & lt; / a & gt; . 이 경우 해결 방법은 값을 따옴표로 묶는 것입니다.
위의 특성을 문서에서 사용했지만 사용중인 문서 형식이이 요소의 해당 특성을 지원하지 않습니다. 이 오류는 종종 '엄격한'코드를 잘못 사용하여 발생합니다. 프레임 유형을 사용하는 문서와의 문서 유형 (예 : '전환'문서 유형을 사용하여 '타겟'속성을 가져와야 함) 또는 'marginheight'와 같은 공급 업체 독점 확장을 사용하여 (대개 원하는 효과를 얻기 위해 CSS를 사용하여 고정됩니다).
이 오류는 정의되지 않은 요소에 지원되는 속성이 없으므로 사용중인 문서 유형에서 요소 자체가 지원되지 않는 경우에도 발생할 수 있습니다. 이 경우 자세한 정보는 element-undefined 오류 메시지를 참조하십시오.
수정 방법 : 요소 및 속성의 맞춤법 및 대소 문자를 확인하고 (XHTML은 모두 소문자임을 기억하십시오) 및 / 또는 선택한 문서 유형에서 허용되는지 확인하고 / 또는이 속성 대신 CSS를 사용하십시오. & lt; embed & gt;을 사용할 때이 오류가 발생하면 요소를 사용하여 웹 페이지에 플래시 미디어를 통합하려면 유효한 플래시의 FAQ 항목을 참조하십시오.
현재 문서의 경우 유효성 검사기는 & lt; FOO / & gt; 대부분의 작성자의 기대를 깨고 유효성 검사기에서 혼동스러운 경고 및 오류 메시지를 발생시키는 기존 규칙에 따라 이 해석은 HTML 4 문서 또는 다른 SGML 기반 HTML 문서에 의해 트리거됩니다. 메시지를 피하려면 & quot; / & quot; 이러한 맥락에서 문자. 주의 : & lt; FOO / & gt; XML - 호환 "자체 폐쇄 (self-closing)"기능으로 해석되어야한다. 태그가 있으면 XHTML 또는 HTML5를 사용해야합니다.
이 경고 및 관련 오류는 하나 이상의 & quot; / & quot;을 포함하는 인용되지 않은 속성 값으로 인해 발생할 수도 있습니다. 예 : & lt; a href = w3c. org & gt; W3C & lt; / a & gt; . 이 경우 해결 방법은 값을 따옴표로 묶는 것입니다.
현재 문서의 경우 유효성 검사기는 & lt; FOO / & gt; according to legacy rules that break the expectations of most authors and thus cause confusing warnings and error messages from the validator. This interpretation is triggered by HTML 4 documents or other SGML-based HTML documents. To avoid the messages, simply remove the "/" character in such contexts. NB: If you expect <FOO /> to be interpreted as an XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted attribute value containing one or more "/". Example: <a href=w3c. org>W3C</a> . In such cases, the solution is to put quotation marks around the value.
For the current document, the validator interprets strings like <FOO /> according to legacy rules that break the expectations of most authors and thus cause confusing warnings and error messages from the validator. This interpretation is triggered by HTML 4 documents or other SGML-based HTML documents. To avoid the messages, simply remove the "/" character in such contexts. NB: If you expect <FOO /> to be interpreted as an XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted attribute value containing one or more "/". Example: <a href=w3c. org>W3C</a> . In such cases, the solution is to put quotation marks around the value.
For the current document, the validator interprets strings like <FOO /> according to legacy rules that break the expectations of most authors and thus cause confusing warnings and error messages from the validator. This interpretation is triggered by HTML 4 documents or other SGML-based HTML documents. To avoid the messages, simply remove the "/" character in such contexts. NB: If you expect <FOO /> to be interpreted as an XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted attribute value containing one or more "/". Example: <a href=w3c. org>W3C</a> . In such cases, the solution is to put quotation marks around the value.
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).
One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
Most likely, you nested tags and closed them in the wrong order. For example <p><em>. </p> is not acceptable, as <em> must be closed before <p>. Acceptable nesting is: <p><em>. </em></p>
Another possibility is that you used an element which requires a child element that you did not include. Hence the parent element is "not finished", not complete. For instance, in HTML the <head> element must contain a <title> child element, lists require appropriate list items (<ul> and <ol> require <li>; <dl> requires <dt> and <dd>), and so on.
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).
One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
Most likely, you nested tags and closed them in the wrong order. For example <p><em>. </p> is not acceptable, as <em> must be closed before <p>. Acceptable nesting is: <p><em>. </em></p>
Another possibility is that you used an element which requires a child element that you did not include. Hence the parent element is "not finished", not complete. For instance, in HTML the <head> element must contain a <title> child element, lists require appropriate list items (<ul> and <ol> require <li>; <dl> requires <dt> and <dd>), and so on.
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).
One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
Most likely, you nested tags and closed them in the wrong order. For example <p><em>. </p> is not acceptable, as <em> must be closed before <p>. Acceptable nesting is: <p><em>. </em></p>
Another possibility is that you used an element which requires a child element that you did not include. Hence the parent element is "not finished", not complete. For instance, in HTML the <head> element must contain a <title> child element, lists require appropriate list items (<ul> and <ol> require <li>; <dl> requires <dt> and <dd>), and so on.
For the current document, the validator interprets strings like <FOO /> according to legacy rules that break the expectations of most authors and thus cause confusing warnings and error messages from the validator. This interpretation is triggered by HTML 4 documents or other SGML-based HTML documents. To avoid the messages, simply remove the "/" character in such contexts. NB: If you expect <FOO /> to be interpreted as an XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted attribute value containing one or more "/". Example: <a href=w3c. org>W3C</a> . In such cases, the solution is to put quotation marks around the value.
The value of the attribute is defined to be one of a list of possible values but in the document it contained something that is not allowed for that type of attribute. For instance, the “ selected ” attribute must be either minimized as “ selected ” or spelled out in full as “ selected="selected" ”; a value like “ selected="true" ” is not allowed.
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
For the current document, the validator interprets strings like <FOO /> according to legacy rules that break the expectations of most authors and thus cause confusing warnings and error messages from the validator. This interpretation is triggered by HTML 4 documents or other SGML-based HTML documents. To avoid the messages, simply remove the "/" character in such contexts. NB: If you expect <FOO /> to be interpreted as an XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted attribute value containing one or more "/". Example: <a href=w3c. org>W3C</a> . In such cases, the solution is to put quotation marks around the value.
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).
One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
Most likely, you nested tags and closed them in the wrong order. For example <p><em>. </p> is not acceptable, as <em> must be closed before <p>. Acceptable nesting is: <p><em>. </em></p>
Another possibility is that you used an element which requires a child element that you did not include. Hence the parent element is "not finished", not complete. For instance, in HTML the <head> element must contain a <title> child element, lists require appropriate list items (<ul> and <ol> require <li>; <dl> requires <dt> and <dd>), and so on.
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).
One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
Most likely, you nested tags and closed them in the wrong order. For example <p><em>. </p> is not acceptable, as <em> must be closed before <p>. Acceptable nesting is: <p><em>. </em></p>
Another possibility is that you used an element which requires a child element that you did not include. Hence the parent element is "not finished", not complete. For instance, in HTML the <head> element must contain a <title> child element, lists require appropriate list items (<ul> and <ol> require <li>; <dl> requires <dt> and <dd>), and so on.
For the current document, the validator interprets strings like <FOO /> according to legacy rules that break the expectations of most authors and thus cause confusing warnings and error messages from the validator. This interpretation is triggered by HTML 4 documents or other SGML-based HTML documents. To avoid the messages, simply remove the "/" character in such contexts. NB: If you expect <FOO /> to be interpreted as an XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted attribute value containing one or more "/". Example: <a href=w3c. org>W3C</a> . In such cases, the solution is to put quotation marks around the value.
For the current document, the validator interprets strings like <FOO /> according to legacy rules that break the expectations of most authors and thus cause confusing warnings and error messages from the validator. This interpretation is triggered by HTML 4 documents or other SGML-based HTML documents. To avoid the messages, simply remove the "/" character in such contexts. NB: If you expect <FOO /> to be interpreted as an XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted attribute value containing one or more "/". Example: <a href=w3c. org>W3C</a> . In such cases, the solution is to put quotation marks around the value.
An "id" is a unique identifier. Each time this attribute is used in a document it must have a different value. If you are using this attribute as a hook for style sheets it may be more appropriate to use classes (which group elements) than id (which are used to identify exactly one element).
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).
One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
Most likely, you nested tags and closed them in the wrong order. For example <p><em>. </p> is not acceptable, as <em> must be closed before <p>. Acceptable nesting is: <p><em>. </em></p>
Another possibility is that you used an element which requires a child element that you did not include. Hence the parent element is "not finished", not complete. For instance, in HTML the <head> element must contain a <title> child element, lists require appropriate list items (<ul> and <ol> require <li>; <dl> requires <dt> and <dd>), and so on.
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
The element named above was found in a context where it is not allowed. This could mean that you have incorrectly nested elements -- such as a "style" element in the "body" section instead of inside "head" -- or two elements that overlap (which is not allowed).
One common cause for this error is the use of XHTML syntax in HTML documents. Due to HTML's rules of implicitly closed elements, this error can create cascading effects. For instance, using XHTML's "self-closing" tags for "meta" and "link" in the "head" section of a HTML document may cause the parser to infer the end of the "head" section and the beginning of the "body" section (where "link" and "meta" are not allowed; hence the reported error).
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
The Validator found an end tag for the above element, but that element is not currently open. This is often caused by a leftover end tag from an element that was removed during editing, or by an implicitly closed element (if you have an error related to an element being used where it is not allowed, this is almost certainly the case). In the latter case this error will disappear as soon as you fix the original problem.
If this error occurred in a script section of your document, you should probably read this FAQ entry.
Most likely, you nested tags and closed them in the wrong order. For example <p><em>. </p> is not acceptable, as <em> must be closed before <p>. Acceptable nesting is: <p><em>. </em></p>
Another possibility is that you used an element which requires a child element that you did not include. Hence the parent element is "not finished", not complete. For instance, in HTML the <head> element must contain a <title> child element, lists require appropriate list items (<ul> and <ol> require <li>; <dl> requires <dt> and <dd>), and so on.
An "id" is a unique identifier. Each time this attribute is used in a document it must have a different value. If you are using this attribute as a hook for style sheets it may be more appropriate to use classes (which group elements) than id (which are used to identify exactly one element).
For the current document, the validator interprets strings like <FOO /> according to legacy rules that break the expectations of most authors and thus cause confusing warnings and error messages from the validator. This interpretation is triggered by HTML 4 documents or other SGML-based HTML documents. To avoid the messages, simply remove the "/" character in such contexts. NB: If you expect <FOO /> to be interpreted as an XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.
This warning and related errors may also be caused by an unquoted attribute value containing one or more "/". Example: <a href=w3c. org>W3C</a> . In such cases, the solution is to put quotation marks around the value.
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e. g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e. g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e. g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e. g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e. g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).
This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.
How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
You have used the element named above in your document, but the document type you are using does not define an element of that name. This error is often caused by:
incorrect use of the "Strict" document type with a document that uses frames (e. g. you must use the "Frameset" document type to get the "<frameset>" element), by using vendor proprietary extensions such as "<spacer>" or "<marquee>" (this is usually fixed by using CSS to achieve the desired effect instead). by using upper-case tags in XHTML (in XHTML attributes and elements must be all lower-case).
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
An entity reference was found in the document, but there is no reference by that name defined. Often this is caused by misspelling the reference name, unencoded ampersands, or by leaving off the trailing semicolon (;). The most common cause of this error is unencoded ampersands in URLs as described by the WDG in "Ampersands in URLs".
Entity references start with an ampersand (&) and end with a semicolon (;). If you want to use a literal ampersand in your document you must encode it as "&amp;" ( even inside URLs! ). Be careful to end entity references with a semicolon or your entity reference may get interpreted in connection with the following text. Also keep in mind that named entity references are case-sensitive; &Aelig; and &aelig; are different characters.
If this error appears in some markup generated by PHP's session handling code, this article has explanations and solutions to your problem.
Note that in most documents, errors related to entity references will trigger up to 5 separate messages from the Validator. Usually these will all disappear when the original problem is fixed.
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
This is usually a cascading error caused by a an undefined entity reference or use of an unencoded ampersand (&) in an URL or body text. See the previous message for further details.
The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.
Typical values for type are type="text/css" for <style> and type="text/javascript" for <script> .
For the current document, the validator interprets strings like <FOO /> according to legacy rules that break the expectations of most authors and thus cause confusing warnings and error messages from the validator. This interpretation is triggered by HTML 4 documents or other SGML-based HTML documents. To avoid the messages, simply remove the "/" character in such contexts. NB: If you expect <FOO /> to be interpreted as an XML-compatible "self-closing" tag, then you need to use XHTML or HTML5.